首页> 外文会议>SPIE Eco-Photonics 2011 : Sustainable Design, Manufacturing, and Engineering Workforce Education for a Green Future >Improving the performance of the NIST five axis goniospectrometer for measurements of bidirectional reflectance distribution function
【24h】

Improving the performance of the NIST five axis goniospectrometer for measurements of bidirectional reflectance distribution function

机译:改善NIST五轴测角光谱仪测量双向反射率分布函数的性能

获取原文
获取原文并翻译 | 示例

摘要

The five axis goniospectrometer at the National Institute of Standards and Technology (NIST) measures the spectral reflectance of colored samples over a wide range of illumination and viewing angles. This capability is important for the colorimetric characterization of complex materials, such as gonioapparent coatings or retroreflective surfaces. To improve the efficiency of the goniometer, a broad-band source with a matrix-based stray-light corrected CCD based spectrometer was implemented. This new configuration offers a significant reduction in the measurement time allowing for the complete characterization of the goniodistribution of complex materials. Shorter measurement time reduces the load on the precise mechanical assembly, to ensure high angular accuracy over time. Special care was taken to extend the effective dynamic range of measured intensities in the multichannel detection mode to the values of 106 - 107 needed for the characterization of colored samples. The expanded uncertainty of the measured Bidirectional Reflectance Distribution Function (BRDF) for this new setup is about 0.5 % (k = 2) which is comparable to the uncertainty levels of the instrument operating with monochromatic illumination and a silicon photodiode. To validate the new system configuration, the measured BRDF or spectral reflectance factors (R) of test samples were compared with different instruments and we found an agreement of about 0.5 %.
机译:美国国家标准技术研究院(NIST)的五轴测角光谱仪可在各种照明和视角范围内测量彩色样品的光谱反射率。该功能对于复杂材料的比色表征非常重要,例如角表观涂层或逆反射表面。为了提高测角仪的效率,使用了基于矩阵的杂散校正CCD光谱仪的宽带光源。这种新配置大大减少了测量时间,从而可以完全表征复杂材料的角分布。较短的测量时间可减少精密机械组件的负荷,以确保随时间推移实现较高的角度精度。要特别注意将多通道检测模式下测量强度的有效动态范围扩展到表征有色样品所需的106-107值。对于这种新设置,测得的双向反射率分布函数(BRDF)的扩展不确定度约为0.5%(k = 2),与使用单色照明和硅光电二极管的仪器的不确定度水平相当。为了验证新的系统配置,将测得的测试样品的BRDF或光谱反射系数(R)与不同的仪器进行了比较,我们发现约有0.5%的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号